Functions:
- Current-based protection for feeders
- Meters and logs current, current unbalance, thermal capacity, and earth leakage
- Transformer overtemperature protection
Features:
- Eight functions to protect against overcurrent, earth-faults, and phase loss
- IEC and IEEE overcurrent protection curves
- Thermal element active below overcurrent pickup
- Definite- and inverse-time ground-fault protection
- CT-saturation compensation
- Two set-point groups can be used for (a) Maintenance settings to reduce flash hazard (b) Two different loads
- Eighty-character backlit display
- Compact size for ease of installation and for retrofit applications
- Standard TIA-232 interface with Modbus RTU
- Optional TIA-485 with Modbus RTU and Allen-Bradley DF1, DeviceNet, or Ethernet communications
- Free SE-Comm-RIS PC-interface software
- Universal power supply
- Three programmable output relays; programmable analog output; programmable digital input
- Single temperature-sensor input
- Conformally coated circuit boards
- Replacement for FPU-16
- 10-year warranty
Manuals:
Typical Applications:
- Processing, manufacturing, petroleum, chemical, mining, forestry, water and waste treatment facilities, etc.
- An excellent choice for retrofitting and upgrading applications using existing CT's
System Components:
The FPU-32 uses phase CT's and an earth-fault CT. Applications using 5-A-secondary CT's require an MPU-CIM Current Input Module or MPU-CTI-RT-00 Current Transformer Input Module.
IEEE Device Numbers:
26, 46, 49, 50, 50G, 50N, 51, 51G, 51N, 74, 86
Serial Connector Adapter Kit
Allows connection of RJ45 socket to PC 9-pin serial connector (TIA-232). Includes 1.5m cable.
Surface-Mount Kit
Used for MPU-32 or FPU-32 surface-mount applications.
Installation Instructions
Current Transformer Input Module
Interface between MPU-32 or FPU-32 and 5-A-secondary, 1-A-secondary, and sensitive current transformers. Ring-tongue terminals.
Current Transformer Input Module
Port-Powered Serial Converter
Converts a TIA-485 signal from an MPS, MPU-32, or FPU-32 to a TIA-232 signal for a computer or PLC.
Watertight Cover
Allows relays to be used in a wet environment. NEMA 4 rating. Shown mounted on the MPU-16A.
Current Input Module
Interface between MPU-32 or FPU-32 and 5-A-secondary, 1-A-secondary, and sensitive current transformers.
Industrial TIA-232/TIA-485 Converter
Converts a TIA-485 signal from an FPS, FPU-32, MPS, or MPU-32 to a TIA-232 signal for a computer or PLC. Industrial network quality.
Industrial TIA-232/TIA-485 Converter
Voltage Clamp
Protects the EFCT input on the SE-701, SE-703, MPU-32, and FPU-32 when a current transformer other than the EFCT-1, EFCT-2, or EFCT-26 is used.
Tech Notes
Current Transformer
Current transformer used to detect phase or ground-fault current.
CAD Drawing
Earth-Fault Current Transformer
Sensitive current transformer used to detect ground-fault current. Flux conditioner not required.
EFCT Flux Conditioner
Helps prevent saturation when installed in the EFCT-1 window.
EFCT Flux Conditioner
Dimensions: EFCT-1FC has a 70-mm (2.75") ID window.
Used with: EFCT-1
Used with: EFCT-1
Current Sensor
Current sensor used to detect ground-fault current.
Current Sensor
Current sensor used to detect ground-fault current.
Current Sensor
Current sensor used to detect ground-fault current.
Current Transformer
Current transformer used to detect phase or ground-fault current.
Earth-Fault Current Transformer
Sensitive current transformer used to detect ground-fault current. EFCT-1FC flux conditioner available.
Earth-Fault Current Transformer
Sensitive current transformer used to detect ground-fault current. Flux conditioner included.
Current Sensor
Current sensor used to detect ground-fault current.
Current Sensor
Current sensor used to detect ground-fault current.